Q-tech QT6T w__Gate Bedienungsanleitung PDF herunterladen (Seite 3)

MIL-PRF-55310/17F

REQUIREMENTS:

Interface and physical dimensions: See figure 1.

Mounting: See figure 1.

Terminals: See figure 1.

Seal: Hermetic in accordance with MIL-PRF-55310

, maximum leakage rate 5 x 10

-8

atm cc/s.

Weight: 0.5 ounce, maximum.

Oscillator: Class 2 or any class 1 or class 3 oscillator meeting all class 2 requirements and verification tests

specified herein and in MIL-PRF-55310

Calibration: Manufacturer calibrated.

Screening: In accordance with MIL-PRF-55310

, product level B or S, as applicable.

Temperature:

Operating: See table I.

Storage: -62C to +125C.

Oscillator load: Standard TTL loads (see table I).

Output waveform: Symmetrical square wave.

Output gating: Output is gated “ON” when pin 9 (gate input) is at the 1 level.

Supply voltage: 5.0 V dc 10 percent.

Input current: At designated supply voltage (see table I).

Output frequency: Frequency as designated at time of acquisition (see table I).

Output voltage: At designated TTL load (see table I).

Logic 1: 2.4 V dc, minimum.

Logic 0: 0.5 V dc, maximum.

Rise and fall times: See table I.

Duty cycle: See table I.

Initial accuracy at reference temperature (up to 30 days after shipment): See table I.

Initial frequency-temperature accuracy (one-half temperature cycle): Verification applicable. 1

1 2 3 4 5

Keine Kommentare

Q-tech QT6T w__Gate Bedienungsanleitung Seite 3