Q-tech QT62T Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für elektrische Q-tech QT62T herunter. Q-Tech QT62T User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 4
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
AMSC N/A FSC 5955
INCH-POUND
MIL-PRF-55310/20F
28 August 2012
SUPERSEDING
MIL-PRF-55310/20E
24 February 2005
PERFORMANCE SPECIFICATION SHEET
OSCILLATOR, CRYSTAL CONTROLLED, TYPE 1 (CRYSTAL OSCILLATOR (XO)),
40.0 kHz THROUGH 60.0 MHz, HERMETIC SEAL, SQUARE WAVE, TTL
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein
shall consist of this specification sheet and MIL-PRF-55310.
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerances are ±.005 (0.13 mm) for three place decimals and ±.02 (0.5 mm) for two
place decimals.
4. All pads with NC function may be connected internally and are not to be used as external tie points or
connectors.
FIGURE 1. Dimensions and configuration.
Pin number
Function
1-5
NC
6
B+
7-11
NC
12
B+
13-33
NC
34
GND
35-39
NC
40
GND
41
NC
42
OUTPUT
Inches
mm
Inches
mm
.007
0.18
.085
2.16
.008
0.20
.472
11.99
.015
0.38
.500
12.70
.025
0.64
.650
16.51
.050
1.27
Seitenansicht 0
1 2 3 4

Inhaltsverzeichnis

Seite 1

AMSC N/A FSC 5955 INCH-POUND MIL-PRF-55310/20F 28 August 2012 SUPERSEDING MIL-PRF-55310/20E 24 February 2005 PERFORMANCE SPECIFICATION SHEET OSCIL

Seite 2

MIL-PRF-55310/20F 2 REQUIREMENTS: Interface and physical dimensions: See figure 1. Mounting: See figure 1. Pads: See figure 1. Seal:

Seite 3

MIL-PRF-55310/20F 3 TABLE I. Dash numbers and operating characteristics. 1/ Maximum input current for no load condition. Actual configuration of

Seite 4

MIL-PRF-55310/20F 4 Part or Identifying Number (PIN): Consists of “M” prefix followed by specification sheet number, a dash and coded alphas, and nu

Kommentare zu diesen Handbüchern

Keine Kommentare